Showing posts with label Switch. Show all posts
Showing posts with label Switch. Show all posts

Thursday, August 12, 2010

Basic HP ProCurve Command Reference - Part 2

When setting up an HP ProCurve switch it is important to setup the switch to use a time protocol
Otherwise the switch will use a default date and time of 01/01/1990.

If you simply set the time on the switch as opposed to using a dynamic time protocol the switch will revert to 01/01/1990 when the switch is rebooted.

Therefore you can execute the following commands to setup the switch to use the SNTP protocol. Please take not the items in bold are variables and are dependent on the geographic location of the switch.

Switch Name#config
Switch Name(config)#time timezone -360
Switch Name(config)#time daylight-time-rule continental-us-and-canada
Switch Name(config)#timesync sntp
Switch Name(config)#sntp server 172.16.32.10 3
Switch Name(config)#sntp unicast
Switch Name(config)#show sntp
Switch Name(config)#show time
Switch Name(config)#write memory

Tuesday, June 1, 2010

HP Storage Selector

Once again I have recently discovered a little known HP tool that is designed to help prospective customers pick the appropriate storage area network for their environment.  Much like the HP ProCurve switch selector tool, an individual can select their requirements and the storage selector tool will refine the product offering based on those selections.

The HP Storage Selector tool provides an easy way to find any of the following products:
  • Disk storage systems
  • Tape and storage media
  • Storage Blades
  • NAS systems
  • Storage networking
  • Storage software
  • Information Management Software
HP Storage Selector

Tuesday, December 15, 2009

HP ProCurve Product Switch Selector

I recently discovered a HP ProCurve tool that assists in the switch selection process, the Product Switch Selector.

This online tool is not exactly easy to find on the ProCurve site and I only discovered it by chance.  However, despite the fact that it is buried within the ProCurve site it does provide quite a intuitive interface for determining which of the HP ProCurve switch products would suit a customers requirements.

The first option that is presented is whether the system will display fixed port or modular switches or both.  The default is both unless you select otherwise.  There are additional six categories that will assist in the switch selection process.
  • Available Ports
  • Management
  • Routing / Switching
  • Max Port Speed
  • Uplink Speed / Media
  • and Other
Each of the categories have several options that when selected will display the switches that meet the customers criteria.

Hopefully HP will expand the capabilities of this online tool to include adding modules, gbic's, wireless controller, and access points.

Either way for those customers who don't know which switches will meet their needs this tool provides them with the ability to at the very least establish a solid foundation on which to add more components and devices.

http://www.procurve.com/Products/Selector/switches/index.htm